一💞🥬、产品介绍

1🚐🥥、本设备是桉树🍠、杨树、松树等杂树木材加工的杏鑫床🤛🏼，设备采用全自动数控旋切系统，是实用性及性价比较高的杏鑫床。

2🤸‍♂️、进刀电机采用伺服系统和交流异步系统（选装）。

3🤞🏿、变速系统采用锅轮和硬面（选装）。

4🏷、此产品有WJ1400－7和1200－7（选配）。

5🧑🏿‍🔬、设备可加装剩余尾板剪齐功能（选装）。

二、特点

1🎱、采用粗牙加大螺杆进刀、进退刀速度快。

2、全自动数控旋切系统，螺杆、导轨母套浸泡在机油里👩🏻‍🎤，磨损小👴🏽。

3、重量重🤾🏽‍♀️、精度高🚇🧅、承载力大、效率高👩🏼‍🚀、运行平稳🏉、可靠性高、寿命长。

4、WU1200－7，辊筒为整条，单辊和双辊中间无轴承。润滑好☎️、进给精准、阻力小🤴🏽，电力损耗低。

5、维修简单、操作方便。

I. product introduction

1. This equipment is a rotary cutting machine bed for processing eucalyptus, poplar, pine and other miscellaneous trees. The equipment adopts a full-automatic numerical control rotary cutting system and is the rotary cutting machine bed with the highest practicability and cost performance.

2. The feed motor adopts servo system and AC asynchronous system ( optional ).

3. The speed change system adopts pan wheel and hard surface ( optional ).

4. This product has WJ1400 - 7 and 1200 - 7 ( optional ).

5. The equipment can be equipped with the function of trimming the remaining tailboards ( optional ).

II. Characteristics

1. Use coarse teeth to increase screw feed and feed speed.

2. Full - automatic numerical control rotary cutting system. Screw rod and guide rail sleeve are soaked in engine oil with little wear.

3. Heavy weight, high precision, large bearing capacity, high efficiency, stable operation, high reliability and long service life.

4. WU 1200 - 7, the roller is whole, and there is no bearing between single roller and double roller. Good lubrication, accurate feeding, low resistance and low power loss.

5. Simple maintenance and convenient operation.